Need help?Do you have a question about the Pakedge MS-2424 and is the answer not in the manual?
Steps to add or edit interface settings via tiles and sub-tabs.
View/configure key port settings like name, status, and auto-negotiation.
View active VLANs and create new VLANs in the database.
View/edit switchport settings like mode, native, and tagged VLANs.
View/configure key port settings like enablement, priority, and power limit.
Steps to restart or reset the switch via the web interface.
Instructions for resetting the switch using the physical button.
Steps to add or edit interface settings via tiles and sub-tabs.
View/configure key port settings like name, status, and auto-negotiation.
View active VLANs and create new VLANs in the database.
View/edit switchport settings like mode, native, and tagged VLANs.
View/configure key port settings like enablement, priority, and power limit.
Steps to restart or reset the switch via the web interface.
Instructions for resetting the switch using the physical button.
General| Model | MS-2424 |
|---|---|
| Type | Managed Switch |
| Ports | 24 |
| Layer | Layer 2 |
| Power over Ethernet (PoE) | No |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table Size | 16K |
| Jumbo Frame Support | Yes |
| VLAN Support | Yes |
| QoS | Yes |
| Rack Mountable | Yes |
| Fanless Design | No |
| Management | SNMP, Web |
To Next Page
