Need help?Do you have a question about the Pakedge MS-4424 and is the answer not in the manual?
Explains how to change default login credentials for security.
Details configuring network mode (DHCP/Static), IP address, and subnet mask.
Guides on how to add or edit interface settings via Port, VLAN, or PoE tiles.
View and create active VLANs in the VLAN database.
View/configure key port settings like enable, name, priority, and power limit.
Configure additional settings like system threshold and power management mode.
Guides on how to restart or reset the switch via its web interface.
Explains how to use the physical reset button for rebooting or factory reset.
Manage, configure, and monitor STP activity for MST, MST Ports, and CST Ports.
Explains how to change default login credentials for security.
Details configuring network mode (DHCP/Static), IP address, and subnet mask.
Guides on how to add or edit interface settings via Port, VLAN, or PoE tiles.
View and create active VLANs in the VLAN database.
View/configure key port settings like enable, name, priority, and power limit.
Configure additional settings like system threshold and power management mode.
Guides on how to restart or reset the switch via its web interface.
Explains how to use the physical reset button for rebooting or factory reset.
Manage, configure, and monitor STP activity for MST, MST Ports, and CST Ports.
General| Model | MS-4424 |
|---|---|
| Type | Managed Switch |
| Ports | 24 |
| Uplink Ports | 4 |
| PoE Ports | 24 |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table Size | 16K |
| VLAN Support | Yes |
| Rack Mountable | Yes |
| Form Factor | 1U |
| Power Supply | Internal |
| Humidity | 10% to 90% non-condensing |
| Management | CLI |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20° to 70°C (-4° to 158°F) |
| Jumbo Frame Support | 9KB |
To Next Page
