ILP 25/33 Owner’s Manual
Rev.1.4 14
6.2 Hand Held Remote Control (Optional)
Reminder: Do not store remote inside refrigerated vehicles. Control will be damaged.
1. Lowering Down
Press and hold the black button to lower platform.
2. Lifting Up
Press and hold the white button to raise platform.
3. Tilt Down (at Ground Level)
Press and hold the button until the platform starts tilting down.
Note: The tilt down function can also be achieve with the standard toggle switch by performing the
same procedure
4. Tilt Up (at Ground Level)
Press and hold the button until the platform starts tilting up.
Note: The tilt up function can also be achieve with the standard toggle switch by performing the
same procedure
6.3 Wireless Hand Held Remote (Optional)
1. Read the wireless remote owner’s manual before operating the liftgate.
2. Power the remote by using the ON/OFF switch on the rear of the control.
3. Each function has a separate button. Functions are displayed below.
4. After finishing using the gate, switch the power OFF on the remote.
5. Maintain the remote in the cab of the vehicle.
To Next Page
Loading...
Need help?
General
