Palfinger PK85002 - Page 103

Savet
y
devices 4.2-6
Crane overload protection, crane with switched HPLS operation or Fly jib
The crane overload protection responds if you enter the overload
range with the crane (boom, hinged arm, extendable arms) or, if fitted,
with the 2nd hinged system. The particular overload situation with
which the crane is in the overload range is indicated by means of the
LED (lights up red).
The following functions are no longer possible:
- boom:: .................................................................................................... lowering
- hinged arm above horizontal: ................................................................. lowering
- hinged arm below horizontal: .................................................................... raising
- extendable arm: ................................................................................... extending
If fitted:
- rope winch: ................................................................................................ raising
- 2nd hinged system: .................................................................... raising /lowering
- 2nd hinged system: .................................................... extending extendable arm
The movements are not released again until after the load moment has been reduced and after the
lever has been put in the zero position.