Warning horn
On cranes with an outreach of more than 12 metres the OLP button also serves
as a warning horn. To sound the horn you have to keep the OLP button pressed
down for more than half a second.
OLP
Slewing dependend-lifting capacity adjust
The slewing angle-dependent lifting capacity control responds if stability is
endangered by the crane position in connection with further slewing. LED lights
up red.
The following functions are no longer possible:
- boom:.......................................................................................lowering/raising
- hinged arm above horizontal: ...............................................................owering
- hinged arm below horizontal:..................................................................raising
- extendable arm: ................................................................................extending
- load arm:.............................................................................................. slewing
If fitted
:
- rope winch: ............................................................................................raising
- 2nd hinged system:.................................................................raising /lowering
- 2nd hinged system:..................................................extending extendable arm
The movements are not released again until after the load moment has been reduced and after the
lever has been put in the zero position.
To Next Page
Loading...