4.3-7 Remote control
In order to be able to make smooth precise crane movements during
remote-controlled operation the carry belt for the transmitter panel
must be used.
The remote control is not operational until the start button is pressed. For this the operating levers must
be in neutral position. If the EMERGENCY-Off switch is pressed in the unit will not start.
Operation of the Palfinger radio remote control is explained in the operating instructions supplied with
the unit.
To prevent unforeseen disruptions and downtime as a result of empty batteries a charged reserve
battery must always be carried on the vehicle.
Linear radio remote control
Cross-lever radio remote control
Cross-lever radio remote control with turn
function
To Next Page
Loading...