Palfinger RC 400 P2 User Manual

Chapter 6 Remote operation
39
Attaching and detaching of loads by the crane operator
Danger! When the load is attached or detached by the crane
operator, he might inadvertently operate one of the crane functions.
This creates an acute risk of fatal injury.
Attaching of load by the operator:
x Move the boom to the respective position.
x Operate the emergency cut-off button. No crane movement may be possible.
x Properly attach the load to the load lug.
x Exit the working area.
x Release the emergency cut-off button.
x Crane movements are once again permitted.
Detaching of load by the operator:
x Lift the load to the respective position.
x Operate the emergency cut-off button. No crane movement may be possible.
x Properly detach the load from the load lug.
x Exit the working area.
x Release the emergency cut-off button.
x Crane movements are once again permitted.
Interrupting the work with remote control
x Move the crane into transport position.
x Turn off the crane with the key switch.
x Remove the key.
x Keep the remote control handset at a safe place.

Palfinger RC 400 P2 Specifications

General

Brand	Palfinger
Model	RC 400 P2
Category	Remote Control
Language	English