22
View a Batch
A maximum of 100 calibrations can be stored on the
device. They are sorted by sensor type.
Select BATCH
INFORMATION from
the CONFIGURATION menu.
2
Select the sensor type code
from the list. The code is also
the start of the batch code
and can be found on the foil
packaging or box.
Select the desired batch to
open a pop up with details.
3
21
3
Scan the QR code on the side of
the box of sensors. Details about
the batch appear in a pop up
on screen, and is automatically
sorted into the correct folder. If a
batch is added as a duplicate, the
“loaded on” date will update but
nothing else will change.
If this method does not work, transfer the batch
information over USB. See p.34 for details.
1
Continued...
CHLORINE ML
To Next Page
Loading...
Need help?
General
