19
20
Users
See the “Why Configure Kemio” section (p.7) for details on
how users can be used in application for enriching data and
traceability.
Add a User
Select USERS from the
CONFIGURATION menu.
Press ADD A NEW USER,
Type the user’s name,
Press SET to save the user in
memory.
If multiple users are set, the user must select between
them when performing a test. If a single user is set,
Kemio will automatically select it during a test. If no
users are user will be DEFAULT.
Delete a User
Select the user from the list.
Press the button. The user
is deleted from memory.
Previous tests will still be
tagged with that user.
Users cannot be edited.
Batch Information
Add batch information for each new batch of
sensors to Kemio’s memory. Once the batch is in
memory, the sensor can be used for testing.
See p.30 for details about what batch information
is and why it is important for result accuracy.
Add a Batch
Select BATCH INFORMATION
from the CONFIGURATION
menu.
Press the (+) BATCH button.
2
1
To Next Page
Loading...
Need help?
General
