Mixer Tote Part Number LGRMXTTE200L120
Voltage 120 Vac
Current 9.2 A
Frequency 60 Hz
Volume 50 – 200 L
Gas Supply 4 – 6 barg
Gas Connection 10 mm Pneumatic tubing outside diameter
Weight 120 Kg (without fluid in system)
Footprint 1054 mm (W) x 748 mm (D)
Height 1378 mm
Materials of Construction
Mixer Tote 304 SS
Mixer Biocontainer Biocontainer film; outlet flange; inlet manifold and top hat:
LDPE
Impeller: PS
Outlet port: PS
Shaft: SS
Outlet O-rings: Silicone
Motor 0.37 kW
UCI Details LGRMXUCI200L120
RPM 50 – 200
9. General Maintenance Recommendations
It is recommended that the Allegro 200 L single-use mixer be serviced on an annual basis.
Pall Advanced Separation Systems (PASS) servicing group can provide this as a service. Please
contact your Pall representative for further details.
In general, the following critical spares should be considered to be held in stock since failure of
these items in use will prevent use of the mixing system. Component replacement instructions
can be obtained from PASS engineering group.
Please contact Pall.
Critical Spares
Part Number Description
DC201772C00 Support arm/seal housing microswitch (200 L mixer tote)
25
USD 2743 www.pall.com/biopharm
To Next Page
Loading...
Need help?
General
