The below listed items are recommended spares, which should be checked and may replaced
as part of a routine service.
Recommended Spares
Part Number Description
DC201772C00 Support arm/seal housing microswitch (200 L mixer tote)
DC201773C00 Door magentic switch (200 L mixer tote)
DC201774B00 UCI cabinet key
DC201775B00 Tote/lock key
KDC201340C00 Tube support assembly
DC200694C00 Support arm
DC201385C00 Motor and gearbox assembly
LGRMXUCI200L230 UCI (230 V)
LGRMXUCI200L120 UCI (120 V)
The below listed items are optional items and other spares.
Optional Spares
Part Number Description
LGRMXBK200L Baffle kit
LGRMXPBS200L Powder bag support frame
10. WEEE Compliance. Reuse, Recycling and Recovery (2002/96/EC)
The presence of this label on a product means that the product contains electrical or electronic
materials and therefore should not be disposed of as unsorted waste but instead treated
separately. The presence of these materials may, if not disposed of properly, have potential
adverse effects on the environment and human health. Within the European Union users are
urged to recycle such products when being replaced with a newer version or when they have
outlived their useful lives. However as the legislation and facilities vary throughout the member
states, please contact your local Pall sales office or distributor to discuss the available options
for correctly disposing of this product.
11. Warrantee
Pall warrants that Allegro hardware and systems manufactured by Pall, when properly stored
and installed, and operated at ratings, specifications and design conditions, will be free from
defects in material and workmanship during their shelf life.
Pall liability under any warrantee is limited solely to replacing, or issuing credit for the Allegro
systems and hardware that may become defective during the Warrantee Period.
26
USD 2743
To Next Page
Loading...
Need help?
General
