Pall LevMixer DB-300 - User Manual

Pall Life Sciences. USA: Port Washington, NY, USA 1 800 717 7255 toll free (USA),+1 516 484 5400 phone,
biopharm@pall.com e-mail, www.pall.com. Europe: Fribourg, Switzerland +41 (0)26 350 53 00 phone,
LifeSciences.EU@pall.com e-mail. Asia-Pacific : +65 6389 6500 phone, sgcustomerservice@pall.com e-mail
© 2012, Pall Corporation. Pall, Allegro, Kleenpak, Stax and the Allegro Design are trademarks of Pall Corporation. ®
indicates a trademark registered in the USA and TM indicates a common law trademark.
Filtration.Separation.Solution is a service mark of Pall Corporation.
LevMixer
®
Single-Use Mixing System
OPERATOR MANUAL
Models DB-300, DB-300C
USD 3184

Summary

Safeguards and Precautions

Specifications

Overview

Principle of Operation

Mixing System Components and Accessories

Superconducting Drive Unit Control

Charging the Superconductors

Dolly - Tank Assembly

Bag-Interface Assembly

Inserting Mixing Bag into Container

Coupling the Bag with Superconducting Drive Unit

Mixing

Removing Superconducting Drive Unit from Tank

Maintenance & Care of Superconducting Drive Unit

Preventive Maintenance

Recommended periodic maintenance tasks and schedules for the drive unit.

Troubleshooting

Procedures

0.3.1 Change the frame configuration

Steps to reconfigure the unit's frame for different operational needs.

0.3.2 Sensor ring replacement

Procedure for replacing the sensor ring on the levitator head.

0.3.3 Power cord replacement

Instructions for replacing the unit's power cord safely.

0.3.4 SD micro card replacement

Guide for replacing or inserting the SD micro card for data.

0.3.5 Fuse replacement

Steps to safely replace a blown fuse in the control box.

0.3.6 LED bulb replacement

Procedure for replacing a non-functional LED bulb.

0.3.7 Air filter inspection

Instructions for inspecting and maintaining the unit's air filter.

0.3.8 Speed Calibration Verification

Procedure to verify the rotational speed calibration of the impeller.

Operator Control Interface Guide

P.1 Navigating the Levmixer control screen

Overview of common elements and navigation within the control software.

P.2 User Access Levels

Explanation of different user roles and their access privileges.

P.3 Power up

Detailed steps for the system's power-up sequence and charging.

P.4 Automatic Mode

Guide to operating the mixer using pre-defined recipes.

P.5 Manual Mode

Instructions for manual control of mixing speed and duration.

P.6 Remote Mode

How to control the mixer using external equipment.

P.7 Alarms

Information on system alarms, failure modes, and reset procedures.

P.8 Auxiliary functions

Accessing and modifying system settings like date, time, and passwords.

P.9 Finishing Mixing Run

Understanding finish notifications and status messages after a run.

P.10 Initial Settings

Default factory settings for user interface parameters.

Spare Parts & Standard Accessories Lists

Electrical Schematic

Compact Model

LevMixer - Service

Pall LevMixer DB-300 Specifications

General

Brand	Pall
Model	LevMixer DB-300
Category	Mixer
Language	English