Panasonic 308 - I.nitial.jzing the System

Section 300
Issue 1 August 1990
ei+
S-DBS Installation Instructions
v1.0
INSTALLATION (continued)
4. Initializing the System
a) Set the power switch of the main unit to OFF.
b) Set the RAM switch in the center of the KSU
Tom the HOLD to the CLEAR position.
CJ plum the power surltcIi’?PtIie~iinitX~~ON~
d) Set the RAM switch back to-HOLD.
Q
Ram Switch
Hold Clr MC0
L