Panasonic 308 - Dialing Alternatives; Redial; To Check a Redialed Number

Section 700
Issue 1 July 1990
S-DBS Operating Instructions
Vl .o
DIALING ALTERNATIVES
Redial
The REDIAL key repeats the last number dialed up to a maximum of 16 digits.’ A
maximurn of five speed dialing codes can also be redialed.
1.
Press a line key
c-3
.
3.
Press REDIAL key
4. If the number is still busy, you can press REDIAL key again only ifthe
system is programmed for Auto-Flash-F&dial. The outside line is
flashed once automatically and the last number is redialed.
To check a redialed number:
1.
Press ON/OFF key
2.
Press CONF key
3.
Press REDIAL key