52
Screen displays
:
This lights if a problem occurs in the
camera recorder when face-to-face
shooting is performed in the mirror mode.
:
This lights when the internal battery used
for the calendar has run down.
>Zoom position display
The zoom position from Z00 (max. wide
angle) to Z99 (max. telephoto) appears here.
?AWB information display
The white balance information appears here.
@Focus control information display
The focus control information from 99 to 00
appears here.
95 (focal length: infinity)
:
50 (focal length: approx. 1 meter)
Under 49 (macro range)
:
00 (focal length: approx. 2 cm)
ODepending on the zoom position, the focus
may not be within the macro range.
Similarly, depending on the zoom position,
the lower limit of the macro range may
differ.
AMacro control display
BIris display
The F-number appears here.
:Audio sampling frequency display
;Scene filename display
<Progressive display
The information on the frame rate when
shooting in the progressive mode is displayed
here.
=Warning information displays
REMOTE:
This flashes when the component for which
the wireless remote control unit is set is the
wrong one.
:
This lights when condensation has formed
inside the camera recorder.
:
This flashes when the cylinder head is
dirty.
:
This flashes when the cassette tape has
not been inserted or when it has been set
to the recording inhibit mode.
8Shutter speed display
The shutter speed is normally displayed here.
“SLOW” is displayed in the slow shutter
mode.
When the ZEBRA button is pressed and the
marker is displayed (see page 17), the video
level of the image near the center of the
screen is displayed as a value from 0% to
99%.
When the level exceeds 99%, “99%
::
” is
displayed.
9Audio level meter display
To Next Page
Loading...
