10
The operator may now change the menu by using the Operation Lever in the up direction
S or down direction T. This will highlight each selection, one at a time. Highlight any
function that you would like to change. Now press the Operation lever like a button, and
this will display the items in that menu selection. To chose the item in this menu, once
again press the Operation Lever in the up direction S or down direction T. To pick your
selection press the Operation Lever and this will move the on screen arrow to the selec-
tion you want. Now that you have made your selection Press the MENU button two times
to exit the menu and return to a normal screen. There is no set button; merely choosing
the item then pressing the menu button twice will effect the change.
Note:
You can not operate the menu system while you are recording.
To Next Page
Loading...
