19
4.3 SW MODE Screen
Mid Gain
This item selects the video gain at the M position of the GAIN switch lo-
cated on the side of the DVX-100. There are five settings you can choose from:
0dB to 12dB. The factory default is set to 6dB.
High Gain This item selects the video gain at the H position of the GAIN switch lo-
cated on the side of the DVX-100. There are five settings you can choose from:
0dB to 12dB. The factory default is set to 12 dB.
ATW
Normally, the white balance should be re-adjusted as the lighting conditions change.
The Auto Tracking White function, is used during the record mode to continually adjust the
white balance automatically. With this menu item you can assign this function to one of po-
sitions of the WHITE BAL switch or turn it OFF.
There are four settings:
OFF: This turns off the ATW function and allows the AUTO button or USER button to take
control.
Ach: Sets the ATW function to Ach position of the WHITE BAL switch.
Bch: Sets the ATW function to Bch position of the WHITE BAL switch
PRE:
Sets the ATW function to PRST (Preset) position of the WHITE BAL switch
Handle Zoom
This item sets the zoom speeds of the lens, which are controlled by the
HANDLE ZOOM switch located on the handle of the DVX-100.
L/OFF/H: Low/ OFF/ High speeds are set to the 1/2/3 positions of the Handle Zoom
switch .
L/M/H: Low/ mid (Medium)/ High speeds are set to the 1/2/3 positions of the Handle Zoom
switch.
Item Settings Default
MID GAIN 0dB, 3dB, 6dB, 9dB, 12dB 6 dB
HIGH GAIN 0dB, 3dB, 6dB, 9dB, 12dB 12 dB
ATW OFF, AcH, BcH, PRE OFF
HANDLE ZOOM L, OFF, H L,M,H L/OFF/H
IRIS DIAL DOWN OPEN /UP OPEN DOWN OPEN
USER 1 COLOR BAR YES
USER 2 BACKLIGHT BACKLIGHT
To Next Page
Loading...
