14
4 . Camera Menus Screen
4.1 Scene File Screen
The Scene File Menu allows the user to quickly change the setup for up to six scenes with a
turn of the scene dial.
The scenes are tailored to various shooting conditions and are stored in the six menu
memories and are selected by a six position rotary dial (cine switch), located at the back of
the camcorder. You may also set up your own scene files instead of using the factory de-
faults.
The factory defaults are set up for six different scenes:
F1 : SCENE This file contains the settings suited for standard recording.
F2 : FLOU
This file contains the settings suited for recording under fluorescent lights.
F3 : SPARK
This file contains the settings suited to accentuating the subject while
recording (for shooting a wedding reception, etc.)
F4 : B-STR
This file contains the settings suited for recording with extended
gradations in the dark areas (for recording scenes at dusk, etc.)
F5 : 24P This file contains the settings suited for recording in the progressive 24P
mode
F6: ADVANC This file contains settings suited for recording in progressive 24p
advanced mode.
Note:
During recording, you can not change the scene file to progressive. You must be
in the record standby mode to change to the progressive mode.
Factory Defaults for
Defaults for Scene File Dial
F1 F2 F3 F4 F5 F6
Items ——— FLOU. SPARK B-STR 24P ADVANC
DETAIL LEVEL 0 0 + 5 0 - 4 0
CHROMA LEVEL 0 + 2 + 3 + 3 0 0
CHROMA PHASE 0 0 0 0 0 0
COLOR TEMP 0 0 0 0 0 0
MASTER PED 0 0 -3 - 1 -5 -5
A. IRIS LEV 0 0 0 - 1 - 3 - 3
GAMMA NORM NORM LOW HIGH CINE-LIKE CINE-LIKE
SKIN TONE DTL OFF OFF OFF OFF OFF OFF
MATRIX NORM NORM NORM NORM CINE-LIKE CINE-LIKE
V DETAIL FREQ THICK THICK THICK THICK THICK THIN
PROGRSSIVE OFF OFF OFF OFF 24P 24P(Adv)
To Next Page
Loading...
