130
Manipulating Clips with Thumbnails
: Switching the Thumbnail Display
The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail screen.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button. The thumbnail
menu appears.
a. THUMBNAIL MENU button
3 Select THUMBNAIL from the thumbnail menu. Switch
the thumbnail display by selecting one of the following
items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system format.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted
in the specified slot.
When this item is selected, “SLOT1” to
“SLOT5” are displayed as a sub-menu. Select
the desired slot to display the clips.
SETUP: Please refer to [Setting the Thumbnail Display
Mode] (page 142) for information about this
item.
EXIT: Close the sub-menu.
Switching the Thumbnail Display
a
!"#$%&'())*#+,-.+/012345677899.')9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
