74
Adjustments and Settings for Recording
: Setting Time Data
The unit supports UMID metadata. You need to specify as
UMID information the country where you live (using up to
3 characters), organization or company (up to 4 characters)
and user name (up to 4 characters). For the country name,
you must use abbreviations prescribed in the ISO3166
Country Code*.
Here are some examples of the correct method for
specifying a user name:
1 Go to the <UMID SET/INFO> screen from the MAIN
OPERATION page.
2 Turn the jog dial button to move the arrow (cursor) to the
option USER.
3 Press the jog dial button. The arrow (cursor) moves to
the user entry area, allowing you to enter a user name.
4 Turn the jog dial button until a desired character
appears. The characters appear in the following order:
# Note
The COUNTRY entry can only include alphabetical
characters and spaces.
5 Press the jog dial button to accept a desired character.
6 Turn the jog dial button to move the arrow (cursor) to the
next digit (clockwise), and repeat steps 4 to 5 to set
characters.
To change an input character, go back to step 3.
7 When the last character is set, press the jog dial button
to bring the arrow (cursor) back to the option USER.
8 To exit the menu, press the MENU button.
Setting UMID Information
* Examples: China CHN
U.S.A. USA
Canada CAN
Japan JPN
Space: "
#
Alphabetical characters: A to Z
#
Numerals: 0 to 9
#
Symbols: ', >, <, /, -
!"#$%&'())*#+,-.+/012345677899(O9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
