This unit is capable of recording 4 independent audio channels in all recording formats except for native recording with VFR.
When the AUDIO SELECT CH1/CH2 switch is positioned at [AUTO], the recording levels for audio channels 1 and 2 are
automatically adjusted. To manually adjust the recording levels, position the switch at [MAN]. Note that the recording levels for
audio channels 3 and 4 are selected through a menu option.
#Note
4-channel sound is recorded on P2 cards.
The input signals to be recorded on audio channels 1, 2, 3,
and 4 are selected with the AUDIO IN switch. For more
information, see [Audio (input) Function Section] (page 17).
a. Display window
b. MONITOR CH1/3 / ST / CH2/4 selector switch
c. MONITOR SELECT CH1/2 / CH3/4 selector switch
d. AUDIO IN switch (CH1/CH2/CH3/CH4)
e. AUDIO LEVEL CH1/CH2 controls
f. AUDIO SELECT CH1/CH2 switch
#Notes
" Four-channel-recorded audio signals are SDI-output as
they are.
" When using VFR with native recording, audio cannot be
recorded or output.
Specific audio settings are performed through the <MIC/
AUDIO1> and <MIC/AUDIO2> screens on the MAIN
OPERATION page.
For more information, see [MAIN OPERATION] (page 195).
Selecting Audio Input Signals and Adjusting
Recording Levels
Selecting Audio Input Signals
a
b
c
d
e
f
!"#$%&'())*#+,-.+/012345677899/.9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
