144
Manipulating Clips with Thumbnails
: Properties
3 Press the SET button.
The input window (soft keyboard) for modifying
metadata is displayed. Use the keyboard to modify the
metadata.
The keyboard operation is the same as [Checking and
modifying read metadata] (page 138).
4 Press OK on the keyboard to write the modified
metadata on the clip and return to the metadata window.
#Notes
" Deleting only the respective items of LOCATION
(recording location data) in SHOOT is not possible. By
setting ALTITUDE to empty, other LONGITUDE/
LATITUDE items are collectively deleted.
" The metadata for a clip with the incomplete clip
indicator cannot be modified. For the clips recorded on
multiple P2 cards, modify the metadata while all P2 cards
are inserted.
" Any MEMO with 100 characters or more cannot be
modified.
Select PROPERTY ! CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button and select
PROPERTY ! PROPERTY SETUP ! P2 CARD CAP
from the thumbnail menu.
The following screen appears. Select the P2 card status
display settings from the P2 CARD CAP menu option.
REMAIN:
Show remaining free space on the P2 card as
the P2 card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card
as the P2 card status display.
P2 Card Status Display
P2 Card Status Display Settings
!"#$%&'())*#+,-.+/012345677899.OO9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
