SD memory cards can also be formatted from the thumbnail
screen. With an SD memory card inserted into the unit,
perform the following operation:
1 Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2 Press the THUMBNAIL MENU button and select
OPERATION ! FORMAT from the thumbnail menu.
The following screen appears. Select “SD CARD”, then
press the SET button.
Select “EXIT” if formatting is not required.
3 The following screen appears. Use the cursor buttons
and the SET button to select YES.
4 The SD memory card is formatted.
#Note
SD memory cards can also be formatted from the menu
screen. For more information, see [Handling SD memory
cards] (page 92).
Formatting SD memory cards
!"#$%&'())*#+,-.+/012345677899.O.9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
