The camera ID is specified through the <CAMERA ID>
screen.
The ID can include up to 10 alphanumeric characters,
symbols, and/or spaces.
#Note
When the settings menu is displayed, outputting color bar
signals does not indicate the camera ID.
1 Go to the <CAMERA ID> screen from the CAM
OPERATION page.
2 Turn the jog dial button to move the arrow (cursor) to
options ID1: - ID3:.
3 Press the jog dial button. The arrow (cursor) moves to
the ID entry area, allowing you to enter an ID.
4 Turn the jog dial button until a desired character
appears. The characters that appear are switched in the
following order:
5 Press the jog dial button to accept a desired character.
6 Turn the jog dial button to move the arrow (cursor) to the
next digit (clockwise), and repeat steps 4 - 5 to set
characters.
To change an input character, turn the jog dial button to
move the arrow (cursor) to the appropriate character
and carry out steps 4 and 5.
7 When all the characters are set, turn the jog dial button
to move the arrow (cursor) to : .
8 Pressing the jog dial button brings the arrow (cursor)
back to the options ID1: - ID3:.
9 To exit the menu, press the MENU button.
#Notes
" When the menu option CAMERA ID is set to “BAR”,
the camera ID is recorded together with color bar
signals.This menu option is accessible from the <VF
INDICATOR1> screen on the VF page.
" The ID POSITION menu option can be used to select
a position where the camera ID is superimposed on
the color bar. The ID POSITION option can be
accessed through the <VF INDICATOR1> screen on
the VF page.
" When the TIME/DATE menu option is set to “ON”, the
camera ID along with the date and time information
are superimposed on the color bar. The TIME/DATE
option can be accessed through the <VF
INDICATOR1> screen on the VF page.
Providing an ID to the Camera
Space: "
#
Alphabetical characters: A to Z
#
Numerals: 0 to 9
#
Symbols: ', >, <, /, -
!"#$%&'())*#+,-.+/012345677899('9:;<99=>>?@A>BACDEFGDEHIJKL?M
To Next Page
Loading...
