Panasonic AK-HC3500ES - Page 39

39
Menu Item Adjustment setting range Initial value
CINE Gamma Cinema Gamma SW OFF, ON OFF
Cinema Gamma SEL VIDEO_REC, FILM_REC VIDEO_REC
Black STR LVL 0 to +
30 0
Dynamic LVL 2
00 %, 300 %, 400 %, 500 % 200 %
Knee Point +90 to +
30 +30
Knee Slope
150 %,
200 %, 250 %, 300 %, 350 %, 400 %,
450 %, 500 %, 550 %, 600 %
150 %
ASU Filter REF, CURRENT REF
Setup Mode FULL (standard), EASY (simplified) FULL
REF File F
actory, User1, User2, User3 Factory
M-PED Target 0.0 % to 7.5 % 5.0 %
ASU Execute READY?
Tally Guard Tally Guard OFF, ON OFF
G / L
H Phase Coarse
–60 to +60 (during HD REF)
–1
20 to +120 (during SD REF)
0
H Phase Fine –45 to +45 0
SD-HD Phase CRS –4 to +4 0
SD-HD Phase Fine –99 to +99 0
HD-SD Phase CRS –8 to +8 0
HD-SD Phase Fine –99 to +99 0
SD-HD V Phase HD, SD SD
SC Coarse 0 to 7 0
SC Fine –
255 to +255 0
SC-H Coarse 0 to 7 0
SC-H Fine –
255 to +255 0
Shutter Shutter OFF, ON OFF
SYNCHRO OFF, ON OFF
Mode Fixed at SHUTTER SHUTTER
Speed
When SHUTTER is ON, SYNCHRO is OFF
60/100/1
25/250/500/1000/1500/2000
When SHUTTER is ON, SYNCHRO is ON
51.5 Hz to 6250 Hz
When SHUTTER is OFF, SYNCHRO is ON
51.5 Hz to 6250 Hz
When SHUTTER is OFF, SYNCHRO is OFF
60/100/125/250/500/1000/1500/2000
When SHUTTER is ON,
SYNCHRO is OFF: 60
When SHUTTER is ON,
SYNCHRO is ON: 51.5
When SHUTTER is OFF,
SYNCHRO is ON: 51.5
When SHUTTER is OFF,
SYNCHRO is OFF: 60
ROM Version CAM (Camera software version display)
B/U (*6) (B/U software version display)
PLD Version TG (TG version display)
SHD (SHD version display)
MEM (MEM version display)
RET VF (RET VF version display)
AUX (AUX version display)
CAMSYS (CAMSYS version display)
OPTION (OPTION version display)
Format Present
Format 50
i, 59.94 i 50 i
Option (*7) — — —
Table of adjustment setting ranges
*6: This is displayed when the buildup unit is connected.
*7: The menu displayed differs depending on the type of option board installed.