Item Setting details
FILE NAME Displays the file name of the file number specified in [FILE No.].
The file name can be changed when [MODE] is set to “STORE”.
Use [MENU] dials 1 and 2 to change the file name.
ロユワヴチョリロユバユュリヵ
ヒチバチフ
1 2
ヴヵヰンユヒ
ヮヰュユョリロユチワㄐハ
ヰョョ
ロユワヴ
ョリロユチヴヸ
ョリロユチワモヮユロユワヴチチョリロユチチヒ
ユワヤヒチホチヤラモンチチユワヤビチホチヱヰヴリヵリヰワ
ワヰム
ユヹユヤヶヵユ
[MENU] dial 1 (far left): Selects the character.
[MENU] dial 2 (second from left): Selects the character position.
EXECUTE When [MODE] is set to “LOAD”
Load the file.
When [MODE] is set to “STORE”
Save the file.
EXTENDER Sets the current magnification of the lens extender.
FILE No. Displays the number of the lens file currently loaded.
FILE NAME Displays the name of the lens file currently loaded.
FLARE R Adjusts the R flare of the display data.
FLARE G Adjusts the G flare of the display data.
FLARE B Adjusts the B flare of the display data.
GAIN R Adjusts the R gain of the display data.
GAIN B Adjusts the B gain of the display data.
W H SAW R Adjusts the R, G, and Bch white shading of the display data in the horizontal direction using a sawtooth wave-
form.
W H SAW G
W H SAW B
W H PARA R Adjusts the R, G, and Bch white shading of the display data in the horizontal direction using a parabolic wave-
form.
W H PARA G
W H PARA B
W V SAW R Adjusts the R, G, and Bch white shading of the display data in the vertical direction using a sawtooth wave-
form.
W V SAW G
W V SAW B
W V PARA R Adjusts the R, G, and Bch white shading of the display data in the vertical direction using a parabolic wave-
form.
W V PARA G
W V PARA B
STORE NUM Specifies the number of the LENS file to be registered.
STORE Saves the [FLARE R/G/B], [GAIN R/B], [W H SAW R/G/B], [W H PARA R/G/B], [W V SAW R/G/B], and [W V
PARA R/G/B] settings to the lens file specified in [FILE No.].
CANCEL Discards changes to the [FLARE R/G/B], [GAIN R/B], [W H SAW R/G/B], [W H PARA R/G/B], [W V SAW
R/G/B], and [W V PARA R/G/B] settings, and returns them to their previous states.
- 101 -
ROP menu
To Next Page
Loading...
