Panasonic AK-HRP1000G

___ indicates factory default settings.
Item Setting value Setting details
CONNECT MODE CAM1 NON
Serial
LAN
Serial(AK)
LAN(AK)
Serial(AW)
LAN(AW)
Sets the connection method for camera 1.
After configuring the settings, press the [MENU] dial to apply the settings.
Serial, LAN: Select when connecting with the AK-HC5000 series, AK-UC3000
series, or AK-UC4000 series.
Serial(AK), LAN(AK): Select these when connecting the AK-HC3500A series and
AK-HC3800 series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300 series.
“Serial”, “Serial(AK)”, and “Serial(AW)” cannot be set for multiple cameras.
CONNECT MODE CAM2 to
CAM99
NON
Serial
LAN
Serial(AK)
LAN(AK)
Serial(AW)
LAN(AW)
Sets the connection method for cameras 2 to 99.
After configuring the settings, press the [MENU] dial to apply the settings.
Serial, LAN: Select when connecting with the AK-HC5000 series, AK-UC3000
series, or AK-UC4000 series.
Serial(AK), LAN(AK): Select these when connecting the AK-HC3500A series and
AK-HC3800 series.
Serial(AW), LAN(AW): Select these when connecting the AK-UB300 series.
“Serial”, “Serial(AK)”, and “Serial(AW)” cannot be set for multiple cameras.
NOTE
An AK-UB300 with a system version of 07.0A-000-00.00 or later can be connected.
- 115 -
ROP menu