Panasonic AK-HRP1000G

Item Setting details
I CENTER Sets the center position (area to which skin tone is applied) on the I axis.
I WIDTH Sets the width of the area to which skin tone is applied on the I axis using the [I CENTER] setting as the cen-
ter.
Q WIDTH Expands the width of skin tone areas in a range from 0 to 255.
Q PHASE Changes the color phase of skin tone areas in a range from 0 to 359 on a vector display.
SKIN TONE DETAIL Enables or disables the skin tone detail function.
- 89 -
ROP menu