41
When performing the operations using the accessory wireless
remote control
1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be
operated.
2 Press the [MENU] button for two seconds.
The main menu is displayed.
3 Press the [] or [] button to make the item to be selected blink.
Each time the [] or [] button is pressed, the blinking item changes.
4 Press the [] or [] button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)
5 Press the [] or [] button to make the item to be set or the setting blink.
Each time the [] or [] button is pressed, the blinking item changes.
When “Return” is made to blink and the [] or [] button is pressed, operation returns to the previous menu.
While the menus are displayed, the [] and [] button have the same functions.
Bear in mind, however, that if the [] button is pressed when it is possible to change a value, the value will be changed by
the button.
6 Press the [] or [] button to change the setting.
7 After the setting has been completed, press the [MENU] button for two seconds.
The menu display is exited.
Basic menu operations
To Next Page
Loading...
