51
Operating
Instructions
Specifications
Power requirements:
DC
12 V (Supplied AC adaptor)
DC
42 V to 57 V (PoE+ power supply)
Current consumption:
1.2 A (Supplied AC adaptor)
0.4 A (PoE+ power supply)
indicates safety information.
■ GENERAL
Ambient operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: –20 °C to 50 °C (–4 °F to 122 °F)
Allowable humidity ranges:
20% to 90% (no condensation)
Mass: Approx. 1.5 kg (3.30 lb)
Dimensions (W x H x D):
160 mm x 186 mm x 166 mm
(6-5/16 inches x 7-41/128 inches x
6-17/32 inches)
[excluding protrusions, direct ceiling
mount bracket]
Finish:
[AW-HN40HWPC], [AW-HN40HWE],
[AW-HN38HWPC], [AW-HN38HWE]
Pearl white
[AW-HN40HKPC], [AW-HN40HKE],
[AW-HN38HKPC], [AW-HN38HKE]
Metallic black
Controller supported: AW-RP50, AW-RP120, AK-HRP200
● It may be necessary to upgrade
the version of the controller so that
the controller will support the unit.
■ INPUT
Power: DC 12 V IN,
PoE+ (IEEE802.3at standard)
Mic/line input:
Stereo mini-jack (ø3.5 mm)
Input impedance:
Approx. 2 kΩ (unbalanced)
[Mic input]
Supported microphones:
Stereo mic (plug-in power,
on/off switching via menu)
Supplied voltage:
2.5 V ± 0.5 V
Mic input level:
–60 dBV ± 3 dBV
[Line input]
Input level:
–10 dBV ± 3 dBV
■ OUTPUT
Video output
HDMI: HDMI connector
● HDCP is not supported.
● VIERA Link is not supported.
■ INPUT/OUTPUT
Input/Output connector
LAN: LAN connector for IP control (RJ-45)
Equipped with straight/crossover
cable auto detection function
RS-232C: Mini DIN 8-pin (IN)
Mini DIN 8-pin (OUT)
RS-422: CONTROL IN RS422A (RJ-45)
USB: Mini-B port
SD card: microSD card slot
To Next Page
Loading...
