Panasonic AW-UE150KP

Speed With Zoom Position [Off, On]
[Off] or [On] is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
Factory settings: On
Focus Adjust With PTZ. [Off, On]
[Off] or [On] is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
[Focus Mode] to [Auto].
This is only enabled when [Manual] has been selected as the [Focus
Mode] setting.
Factory settings: Off
Power On Position [None, Standby, Home, Preset]
Select the initial positions for Pan/Tilt/Zoom when the power is turned
on.
None Keep the positions of Pan/Tilt when the power was
last on, with Zoom being at the Wide end.
Standby Move to the Pan/Tilt/Zoom positions they were in the
last time the camera was switched to Standby mode.
Home Pan/Tilt move to their home positions (front) and
Zoom goes to the Wide end.
Preset Preset playback is performed at the preset position
specified with [Preset Number].
Factory settings: None
Preset Number [Preset001 to Preset100]
Specify a number for preset playback when the power turns ON when
[Preset] is set in [Power On Position].
Factory settings: Preset001
<NOTE>
• If an unregistered preset number is set, preset playback is not
performed and the operation is the same as [None].

Date & time screen [Date&Time]
Make clock settings.
You can set using one of three types [PC Synchronization], [NTP], or
[Manual].
Auto
PC Synchronization
If you click the [Execute] button, the settings are configured by
synchronizing the unit to the date and time of the connected personal
computer.
<NOTE>
• The time zone of the personal computer is not reflected on the unit.
Set the time zone on the unit.
NTP
If you click “NTP>>”, the settings screen for the NTP server appears.
(→ page 136)
Manual
Date/Time
Configure the settings for the month, day, and year and for the hour,
minute, and second.
<NOTE>
• The time is in the 24-hour format.
Time Zone
Selects the time zone according to the region where the camera is
being used.
Factory settings:
(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London
102 103
Web screen configurations (continued)