Panasonic AW-UE150KP

Lens screen
Lens
Focus Mode Auto
Zoom Mode Opt.Zoom
Max Digital Zoom x10
Digital Extender Off
OIS Off
Return
Focus Mode [Auto, Manual]
Select auto or manual mode for the focus adjustment function.
Auto Always adjust focus automatically.
Manual Adjust focus manually.
Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]
Set the maximum magnification rate for zoom.
Opt.Zoom Use only optical zoom.
Optical zoom up to 20× is possible.
i.Zoom Enable the i.Zoom function.
When this function is enabled, digital zoom is used while
reducing image degradation.
When [Format] in the [System 1/2] screen is
2160/59.94p, 2160/29.97p, 2160/50p, 2160/25p,
2160/24p, 2160/23.98p
Up to 24× zoom is possible combining optical zoom and
digital zoom.
• When [Format] in the [System 1/2] screen is other than
one of these, up to 32× zoom is possible combining
optical zoom and digital zoom.
D.Zoom Enable the digital zoom function.
Higher digital zoom magnifications will result in coarser
images.
Max Digital Zoom
[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]
Set the maximum digital zoom magnification.
This is only enabled when [Zoom Mode] is set to [D.Zoom].
<NOTE>
• Higher digital zoom magnifications will result in coarser images.
Digital Extender [Off, ×1.4, ×2.0]
Make settings for the digital extender function.
Off Turn the digital extender function off.
×1.4 The digital zoom will be fixed at 1.4×.
×2.0 The digital zoom will be fixed at 2.0×.
This is only enabled when [Zoom Mode] is set to [Opt.Zoom].
OIS [Off, On]
Turn the optical image stabilization (OIS) function off/on.
<NOTE>
• The optical image stabilization (OIS) function’s level of correction is
reduced during pan/tilt operations.
Return
Return to the previous menu level.
System 1/2 screen
System 1/2
Frequency 59.94Hz
Format 2160/59.94p
Shooting Mode Normal
Color Setting Normal
Genlock
Horizontal Phase 0
Return
Frequency [59.94Hz, 50Hz, 24Hz, 23.98Hz]
This item is selected to switch the frame frequency.
• For details on how to change the frequency, refer to “Changing the
frequency” (→ page 60).
Format
For [59.94Hz]
2160/59.94p, 2160/29.97p, 1080/59.94p, 1080/59.94i, 1080/29.97p,
1080/29.97PsF, 1080/23.98p(59.94i)
*
1
, 720/59.94p
For [50Hz]
2160/50p, 2160/25p, 1080/50p, 1080/50i, 1080/25p, 1080/25PsF,
720/50p
For [24Hz]
2160/24p, 1080/24p
For [23.98Hz]
2160/23.98p, 1080/23.98p, 1080/23.98PsF
*
1
It denotes “1080/23.98p over 59.94i”.
<NOTE>
• Streaming stops when changing the system format.
• For details on how to change the format, refer to “Changing the
format” (→ page 60).
Shooting Mode [Normal, High Sens.]
Select the shooting mode according to the shooting environment.
Normal Select when shooting in an environment with a normal
level of brightness.
High Sens. Select high sensitivity shooting. (Suited to shooting in a
dark environment)
Color Setting [Normal, V-Log]
Set the color (gamma and gamut) for the system as a whole.
Normal This setting allows detailed picture quality adjustments on
the camera.
V-Log Set a gamma curve that provides tones and a wide range
of latitude (exposure range).
<NOTE>
• Functions to adjust picture quality are limited when [Color Setting] is
[V-Log]. Grading will be necessary after shooting.
Genlock
This item is selected to perform the phase adjustments.
Horizontal Phase [–206 to +49]
This is used to adjust the horizontal phase during genlock.
Return
Return to the previous menu level.
56 57
Camera menu items (continued)