z RTMP
Make RTMP/RTMPS transmission settings.
Server setup
The setting is confirmed with the [Set] button.
<NOTE>
• Switch to the appropriate method of registering RTMP/RTMPS
transmission server information suited to the setting information
notified from the RTMP/RTMPS transmission server you are using.
• The Stream Key setting field is displayed only when [Type2] is set.
URL type [Type1, Type2]
Select the method for registering the information for the RTMP/
RTMPS transmission server.
Type1 Specify to set the server URL and RTMP/RTMPS stream
key as a set in [Server URL].
Type2 Specify to individually set the server URL and RTMP/
RTMPS stream key in [Server URL] and [Stream Key].
URL
Server URL
Set the URL for the RTMP/RTMPS server to be transmitted to.
Stream key
The stream key obtained from the RTMP/RTMPS server is set
during streaming only when the service is set to [Type2].
Streaming format
Make settings for H.264 images for use in RTMP/RTMPS
transmission.
The setting is confirmed with the [Set] button.
Refer to the explanation for H.264 (→ page 107) for information
about Image capture size, Frame rate and Max bit rate(per client).
<NOTE>
• Streaming format settings cannot be changed during RTMP/RTMPS
transmissions.
• Set the Streaming format to the settings recommended for the
transmission destination server. Visit the publisher’s website or
contact them about the recommended values.
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 128)
We recommend [IP(UDP)] of [Tracking Data Output] is set to [Off]
during RTMP/RTMPS transmission.
110
Web screen configurations (continued)
To Next Page
Loading...
