128
Activation
(continued)
Activating the unit
1. Click [Browse] of the “Upload” item and
then specify the folder in which the obtained
“ACTIVE.LST” is stored.
2. Click the [Execute] button of the “Upload” item.
3. Click the [OK] button.
After uploading completes, the unit restarts automatically.
4.
Click the [OK] button.
The web screen appears.
5.
Close the Web browser once.
Checking that activation is complete
1. Click [Setup] [Maintenance] [Product info.]
from the Web screen.
2. Check the value of the “Activation counter” item.
Check that the value has been incremented in accordance
with the activation file.
To Next Page
Loading...
