Operating Instructions
19
2 Software Operation
2.1 Registering the Camera
Before you can view or record images, each camera must be configured on this
software.
Note
• When registering a camera, make sure that the camera is connected to a
power outlet and to your network.
• The camera information can be imported and exported (see page 118).
• Monitoring stops while the settings page is displayed.
2.1.1 Creating New Camera
1. Select [Window] [Settings] on the menu bar.
2. Click [Add Camera] on the [Settings] page.
The configuration
window of the item
that is selected on
the left is
displayed.
When you click [Add Camera], a [New camera] item is added.
[Add Camera] Button
3. Configure the settings in the [Camera Settings] page.
To Next Page
Loading...
