Operating Instructions
39
Single-Monitoring Page
In the single-monitoring page, a single image from the focus camera is displayed.
1. Select [Window] [Single-Monitoring] on the menu bar.
• A single image from the focus camera is displayed.
Note
• If you double-click a camera's image on the multi-monitoring page, the
display will switch to the single-monitoring page. When you double-click on
the single-monitoring page, the display will return to the multi-monitoring
page.
• If the click to center function is active, the display area of a camera image
may move when you double-click the image. You can disable the click to
center function (see
page 76).
• The single-monitoring page does not support switching pages. If the single-
monitoring page is displayed while switching is running on the multi-
monitoring page, switching is stopped. Switching will restart after returning to
the multi-monitoring page.
To Next Page
Loading...
