Operating Instructions
91
• The save as window is displayed.
4. Select the destination folder, enter a file name and click [Save].
• Conversion is started.
• When the conversion is completed successfully, the following window is
displayed.
Note
• The file name is set to the start time and end time of recording by default.
• A confirmation screen is displayed if a file with the same name already exists.
To overwrite the existing file, click [Yes]. To save the file under a different
name, click [No], then enter a different file name.
• The file extensions are determined by converted file formats (mpg, avi, asf,
wav).
• The converted image can be played back with Windows Media Player
(Version 9.0 or later).
• If conversion is canceled, images that were converted are not saved.
To Next Page
Loading...
