Operating Instructions
97
5. Click [OK].
• The folder selection window is displayed.
6. Select the destination folder, and click [OK].
• Conversion is started.
• When the conversion is completed successfully, the following window is
displayed.
[Converting multiple recorded images]
The procedure is the same as that for [Converting recorded images into MPG/
WAV/ASF/AVI files]. See page
94.
Note
• When converting multiple recorded images to JPG format, you cannot use
[To one file].
• Images converted to JPEG format are saved in a subfolder in the destination
folder. The name of the subfolder is set to the start time. A new subfolder is
created each 1,000 images.
• If conversion is canceled, images that were converted before the cancellation
are saved.
To Next Page
Loading...
