Operating Instructions
8
1 Camera Monitoring
1.1 Accessing the Camera
1. Start up the web browser on your PC.
2. Enter "http://IP Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page 31 for details about port number, and page 12 in the Installation/
Troubleshooting.
• If the Internet access to the camera is desired, the port number will be
changed in the order of 80 and from 50000 to 50050. It is changed
because some ISPs block port 80.
Note
When [Prohibiting unregistered users] is set on the Security: Administrator
page, authentication window will be displayed. Enter the administrator's or the
general user's user name and password, and the Top page is displayed.
E.g. http://192.168.0.253
(or http://XXXXX.viewnetcam.com)
To Next Page
Loading...
