4.13.3 Preparations
4.13.4 6500K Adjustment
4.13.5 9300K Adjustment
4.14 SECAM Black Level
Adjustment
4.14.1 Equipment to be used
4.14.2 Initial Settings
4.14.3 Adjustment Procedure
4.15 Brightness and ABL
Adjustment
4.15.1 Equipment to be used
4.15.2 Initial Settings
4.15.3 Adjustment Procedure
4.16 Focus Adjustment
4.16.1 Equipment to be used
4.16.2 Initial Settings
4.16.3 Adjustment Procedure
4.17 C/Y Output Adjustment
(BT-S1315DAD/S1415DAD only)
4.17.1 Equipment to be used
4.17.2 Adjustment Procedure
4.18 X-radiation Protection Circuit
Adjustment
4.18.1 Equipment to be used
4.18.2 Initial Settings
4.18.3 Adjustment Procedure
5 Troubleshooting
5.1 The power is not turned on
5.2 No raster appears
5.3 The raster is a horizontal
file:///E:/BT-S1315DA_BT-S1315DAD_BT-S1415DA_BT-S1415DAD/SVC/PVAccel.html (3 z 4) [2006-02-04 08:28:01]
To Next Page
Loading...
