Flash Memory Backup/Restore Function
Panasonic Corporation willbear no responsibility for any damage suffered (including lossof data) as a result of the use of thisfunction.
Creating a Backup of the Flash Memory Data
You can create a backup of the flash memory data, which can be used to recover from hardware failure.
Thisfunction creates a backup of the recent state of the flash memory. To return the factory default, use a recovery disc. ( Create a Recovery Disc)
To create a backup of the flash memory to another storage media (e.g., external hard disk).
Connect the storage media, and follow the steps below.
1. Open the Control Panel, and then click [System and Security] - [File History].
To open the Control Panel, proceed as follows.
Click (Start) - [Windows System] - [Control Panel].
2. Click [System Image Backup].
Follow the on-screen instructions.
N O T E
n Connect the AC adaptor and do not remove it untilbackup is complete.
Restoring the Flash Memory Data
Connect the storage media that created the backup.
1.
Click (Start) - (Settings) - [Update & Security] - [Recovery].
Alternatively, click (Settings) - [Update & Security] - [Recovery] in the tablet mode.
2. Click [Restart now] under “Advanced startup”
*1
.
3. Click [Troubleshoot] - [Advanced options].
4. Click [System Image Recovery].
Follow the on-screen instructions.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Advanced start-up] may be displayed instead of [Advanced startup] in some language preference.)
To Next Page
Loading...
