33
Smart Card
<Only for model with Smart card slot>
You need software and a driver to use a Smart card.
CAUTION
z Do not:
• Hit, bend, or drop the card.
• Touch the contact part with fingers or metal object.
• Place the card in very hot location for a long time.
• Remove the card immediately after inserting it.
To insert the card
1 Slide the latch (A) and open the cover, and insert the Smart card
with the contact part (B) in front.
z Insert the card until it surely fits in the slot.
To remove the card
1 Press the eject button (C).
The Smart card pops out.
CAUTION
z Use the eject button to remove the card, otherwise the reading contact may be damaged.
Inserting/Removing the Smart Card
To Next Page
Loading...
