74
Technical Information
Close the communications software before using the power saving function.
z If the power saving function (standby or hibernation) is activated while communications software is used, the network con-
nection may be interrupted, or the performance may be adversely affected. In this case, restart the computer.
z In a network environment, set the [System standby] and [System hibernates] settings to [Never].
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].
The Windows files included in the retail version of the Windows CD-ROM for OS are contained in the following folders:
c:\windows\docs, c:\windows\dotnetfx, c:\windows\i386, c:\windows\support, c:\windows\valueadd
The COM ports of the computer are assigned as below.
z COM1 : Serial Port A
z COM2 : Serial Port B (Port Replicator
*1
)
z COM3 : GPS
*1
z COM4 : Smart card
*1
z COM5 : Modem
*1
Optional
If you change the assignment, the serial devices may not work properly.
Network Connections and Communications Software
Using the Windows Associated Files
Serial Devices
To Next Page
Loading...
