73
Recover Pro
Recover Pro is a data backup software application developed by Phoenix Technologies Ltd. It provides 3 types of backup as
follows:
• Quick Backup: Scheduled backup of the updated data
• File Backup: File backup at file save and change
• Complete Backup: Backup of the entire data on the internal hard disk
For further information, refer to the software’s online manual.
1 Log on to Windows as an administrator.
2 Close all the applications.
z Disable antivirus software
3 Click [start] - [Run] and input [c:\util\rcvpro\setup.exe], and click [OK].
Follow the on-screen instructions.
z After the computer restarts, Recover Pro starts initialization. Do not touch keys or switch including hot key, during
initialization until an instruction message appears.
CAUTION
z Be sure to use the internal hard disk drive to create the backup area. Never use disk or device other than the
internal hard disk drive.
z Some software (security software, backup software, encryption software, or hard disc accessible specific soft-
ware, etc.) may be incompatible with Recover Pro.
For further information, refer to:
http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/Recover+Pro/default.htm
z When using Personal Secure Drive (refer to the Installation Manual of “Trusted Platform Module (TPM)”), do not
execute File Backup for Personal Secure Drive.
NOTE
z If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the backup
area.
z You cannot change the size of backup area after creation.
To access the online manual
A Click [start] - [All Programs] - [Phoenix Applications] - [Docs], and double-click [UserGuides].
B Double-click the file of Recover Pro user’s guide or Phoenix Always user’s guide.
Installing Recover Pro
To Next Page
Loading...
