Panasonic CF-R1 Series

48
Setup Utility
Information Menu
Language: [English]
Model No: CF-xxxxxx
Serial No: xxxx
CPU Type: xxxxxxxxxxxxxxxxxxxx
CPU Speed: xxx MHz
BIOS: Vx.xxLxx
Embedded Controller: Vx.xxLxx
System Memory: xxx MB
Primary Master: xx GB
English
Japanese
Language
( : Default)
Parameters
Select the language for displaying the Setup Utility.
Disable
Enable
External Monitor
Internal LCD
Simultaneous
Disable
Enable
Touch Pad
Display*
Display Expansion
Main Menu
System Time: [xx:xx:xx]
System Date: [xx/xx/xxxx]
Touch Pad: [Enable]
Display: [Simultaneous]
Display Expansion: [Enable]
( : Default)
Parameters
* The display destination in cases where Windows is not running is set here.
If an external display is not connected, all information will appear on the
internal LCD even if [External Monitor] or [Simultaneous] is selected.
After Windows starts, the setting made in the following field is enabled.
Windows 2000 : [Start] - [Settings] - [Control Panel] - [Intel® Extreme
Graphics] - [Devices]
Windows XP : [start] - [Control Panel] - [Other Control Panel Options] -
[Intel® Extreme Graphics]