134
17.4.24 F95 (Outdoor High Pressure Protection: Cooling or Soft Dry)
Malfunction Decision Conditions
• During operation of cooling or soft dry, when outdoor unit heat exchanger high temperature data is detected by
the outdoor unit heat exchanger thermistor.
Malfunction Caused
• Outdoor heat exchanger temperature rise due to short-circuit of hot discharge air flow.
• Outdoor heat exchanger temperature rise due to defective of outdoor fan motor.
• Outdoor heat exchange temperature rise due to defective outdoor heat exchanger thermistor.
• Outdoor heat exchanger temperature rise due to defective of outdoor unit PCB.
Troubleshooting
To Next Page
Loading...
