Unit CS-PV9CKE CU-PV9CKE
Air Circulation Type Cross-flow fan Propeller fan
Motor Type Induction (4 pole) Induction (6 pole)
Input W 47.4 58.4
Rated Output W 15 30
Fan Speed Low rpm 940±30 —
Medium rpm 1080±30 —
High rpm 1260±30 820±30
Heat Exchanger Description Evaporator Condenser
Tube Material Copper Copper
Fin Material Slot Type Corrugation type
Rows / Stage (Plate fin configuration, forced draft)
2 × 10 1 × 20
FPI 21 18
Dimensions mm 610 × 210 × 25.4 841 × 504.6 × 12.7
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(270)
Refrigerant (R410A) g — 600
Thermostat Electronic Control —
Protection Device — O.L.P.(230V20A/30A)
Capillary Length mm — 803
Circulation L/min — 8.5
Inner Diameter mm — 1.4
Air Filter P.P Honeycomb —
Refrigerant Circulation Control Device Capillary
Compressor Capacitor µFV — 30µF, 370V
Fan Motor Capacitor µFV 1.5µF, 400V 2µF, 400V
•
• •
•
Specifications are subject to change without notice for further improvement
6
CS-PV9CKE CU-PV9CKE / CS-PV12CKE CU-PV12CKE
To Next Page
Loading...
Need help?
General
