Unit CS-PV12CKE CU-PV12CKE
Air Circulation Type Cross-flow Fan Propeller fan
Motor Type Induction (4 pole) Induction (6 pole)
Input W 47.4 65.9
Rated Output W 15 30
Fan Speed Low rpm 900±30 —
Medium rpm 1080±30 —
High rpm 1260±30 830±30
Heat Exchanger Description Evaporator Condenser
Tube Material copper copper
Fin Type slot type Corrugation type
Rows / Stage (Plate fin configuration, forced draft)
2 × 15 1 × 20
FPI 21 17
Dimensions mm 610 × 315 × 25.4 735 × 508.6 × 22
Refrigerant Control Device — Capillary Tube
Refrigeration Oil (c.c) — SUNISO 4GDID or ATMOS M60
(430)
Refrigerant (R410A) g — 890
Thermostat Electronic Control Overload Protector
Protection Device —
Capillary Length mm — 845
Circulation L/min — 9.9
Inner Diameter mm — 1.5
Air Filter P.P Honeycomb —
Refrigerant Circulation Control Device Capillary
Compressor Capacitor µFV — 25µF, 370V
Fan Motor Capacitor µFV 1.5µF, 400V 2µF, 400V
•
• •
•
Specifications are subject to change without notice for further improvement.
8
CS-PV9CKE CU-PV9CKE / CS-PV12CKE CU-PV12CKE
To Next Page
Loading...
Need help?
General
