Panasonic CS-RE18QKE

85
16.2 Outdoor Electronic Controller Removal Procedure
16.2.1 CU-RE18QKE
1 Remove the 8 screws of the Top Panel.
Fig. 1
2 Remove the 8 screws of the Front Panel.
Fig. 2
3 Remove the Top Cover of the Electronic Controller.
Fig. 3
4 Remove the Control Board.
Fig. 4
5 Remove the 6 screws of the Electronic Controller.
Fig. 5
Caution! When handling electronic controller, be careful of
electrostatic discharge.