169 
19.  Disassembly and Assembly Instructions 
 
WARNING
 
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding 
with repair work. Failure to heed this caution may result in electric shocks. 
19.1  CS-TZ20ZKEW  CS-TZ25ZKEW  CS-TZ35ZKEW  CS-TZ42ZKEW   
CS-TZ50ZKEW  CS-RZ25ZKEW  CS-RZ35ZKEW  CS-RZ50ZKEW 
19.1.1  Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal 
Procedures 
19.1.1.1  To Remove Front Grille 
 
 
Figure 1 
19.1.1.2  To Remove Electronic Controller 
 
Figure 2 
3. Slide the 3 lock knobs on the upside of the
 Front Grille to unlock position.
4. Hold both sides of the Front Grille
and remove it by pulling up and
   toward yourself gently.
1. Lift to open the horizontal vane gently.
2. Remove the 3 screws on the Front Grille.
5 Hooks
5. Removing 2 pieces of the Control Board Cover
 by releasing the 5 hooks.